Solenoid controlled pressure reducing valve figure XLC 315/415 PN 16/25

The CSA model XLC 315/415 is a globe pattern hydraulically operated automatic control valve that reduces and stabilizes the downstream pressure to a constant value, regardless of variation in demands and upstream pressure conditions. Thanks to a solenoid control the valve will also open or close in response to a signal.

Product features

• Body and cover in ductile cast iron GJS 450-10.

• Internals in ductile cast iron GJS 450-10 and stainless steel.

• Position indicator in stainless steel.

• Circuitry in stainless steel.

• Unit flow regulator device, needle valves and flow stabilizers in stainless steel.

• Seat in stainless steel.

• Painting with fluidized bed technology RAL 5005.

Applications

• Installed between two supply lines working with different pressure values to ensure and regulate the water supply in response to a signal coming from alarms and emergency situations.

• Protection of civil installation and buildings from excessive pressure with the open or closed option in case of signal sent to the solenoid.

• Protection of water storage regulation devices closing in case of excessive water level.

Standard and connections

• Design and testing according to EN 1074.

• Flanges size from DN 50 to DN 800 mm (XLC 400 series) and up to DN 1000 mm (XLC 300 series), higher on request.

• Flanges standard EN 1092/2, different on request.

Working conditions

• Pressure range: 10-16-25 bar.

• Minimum working pressure: 0.7 bar acting on the pilot.

• Treated water maximum 70°C, higher temperature on request.